T2.5 rubber open synchronous belt body is made of imported high quality synthetic neoprene rubber, and mixed with a variety of different uses of rubber accessories; The skeleton material is imported high quality glass fiber rope; The tooth surface is protected by nylon 66 high tensile cloth.
T2.5 rubber open synchronous belt and T2.5 rubber synchronous belt transmission performance is similar, can be widely used in textile, light industry, chemical industry, machine tools and other general machinery for power transmission, suitable for multi-axis transmission. Customers can flexibly cut the length according to actual needs.
T2.5 rubber open synchronous belt model and specification and T2.5 rubber single-sided tooth synchronous belt the same, using large size mold spiral cut.
T2.5 Rubber open synchronous belt application range
The performance of the door machine system (automatic door, automatic curtain machine) is suitable for linear reciprocating movement, and its positioning is accurate and its carrying capacity is large, which is the best choice for reciprocating positioning transmission
T2.5 Rubber open synchronous belt material
High quality rubber raw material, high strength glass fiber cord, high strength tooth surface cloth
Note when using T2.5 rubber open synchronous belt:
1, pay attention to the T2.5 rubber open synchronous belt surface clean, belt without distortion, full teeth.
2, T2.5 rubber open synchronous belt products should be strictly prohibited to bend, so as not to damage the skeleton material, affecting the strength of the belt.
3, T2.5 rubber open synchronous belt must not scratch the belt, so as to avoid early damage to the belt. The T2.5 rubber open belt avoids contact with chemicals (especially strong oxidizing acids, such as concentrated sulfuric acid, etc.).
4, T2.5 rubber open synchronous belt try to avoid long-term contact with oil and water.
5. When replacing the T2.5 rubber opening synchronization belt, the tension of the belt must be reduced to a minimum before it can be taken out. It is strictly prohibited to use non-professional tools to pry down the T2.5 rubber opening synchronization belt in the case of high tension.
T2.5 Rubber open synchronous belt connection method:
Generally, the method of T2.5 synchronous belt tooth plate is used to fix and connect.
| specification | Pitch length | Number of teeth |
| T2.5×145 | 145.00 | 58 |
| T2.5×160 | 160.00 | 64 |
| T2.5×172.5 | 172.50 | 69 |
| T2.5×200 | 200.00 | 80 |
| T2.5×230 | 230.00 | 92 |
| T2.5×245 | 245.00 | 98 |
| T2.5×265 | 265.00 | 106 |
| T2.5×272.5 | 272.50 | 109 |
| T2.5×275 | 275.00 | 110 |
| T2.5×285 | 285.00 | 114 |
| T2.5×300 | 300.00 | 120 |
| T2.5×305 | 305.00 | 122 |
| T2.5×330 | 330.00 | 132 |
| T2.5×335 | 335.00 | 134 |
| T2.5×355 | 355.00 | 142 |
| T2.5×380 | 380.00 | 152 |
| T2.5×420 | 420.00 | 168 |
| T2.5×480 | 480.00 | 192 |
| T2.5×500 | 500.00 | 200 |
| T2.5×512.5 | 512.50 | 205 |
| T2.5×580 | 580.00 | 232 |
| T2.5×620 | 620.00 | 248 |
| T2.5×625 | 625.00 | 250 |
| T2.5×690 | 690.00 | 276 |
| T2.5×780 | 780.00 | 312 |
