The AT10 rubber single-sided synchronization belt has a 10mm trapezoidal pitch. They are used in medium-sized drives. The AT10 rubber single-sided tooth synchronous belt is designed to carry 30% more load than the T10 rubber single-sided tooth synchronous belt. The tooth shape of AT is large, which minimizes the deformation of the belt teeth and has a larger area of distribution of the belt load. The AT10 rubber single-sided tooth synchronous belt is further enhanced by the addition of tough yarn. Therefore, the AT10 rubber single-sided tooth synchronization belt is a transmission synchronization belt with high load force.

AT10 rubber single-sided synchronous belt General specifications:

(A)AT10 rubber single-sided tooth synchronous belt raw materials: glass fiber reinforced polyester material, neoprene rubber, nylon high tensile cloth

(2)AT10 rubber single-sided synchronous belt load capacity: 220n/mm(1256lbf/in)

(3)AT10 rubber single-sided synchronous belt breaking strength: >=270n/mm(1542lbf/in)

(4)AT10 rubber single-sided tooth synchronous belt operating temperature range: -40 degrees - 120 degrees

AT10 rubber single-sided synchronous belt tooth spacing:

16 mm, 25 mm, 32 mm, 50 mm, 75 mm, 100 mm

The width of the AT10 rubber single-sided synchronization belt can be determined according to customer requirements

AT10 synchronous belt identification:

Three parts: Indicates the length, spacing, and width of the belt brought back by the part number. As shown in the following picture. This AT10 rubber single-toothed synchronous belt model has a pitch length of 260mm and a bandwidth of 16mm.

specification	Pitch length	Number of teeth	specification	Pitch length	Number of teeth
AT10×920	920	92	AT10×1100	1100	110
AT10×890	890	89	AT10×1080	1080	108
AT10×840	840	84	AT10×1010	1010	101
AT10×800	800	80	AT10×1000	1000	100
AT10×780	780	78	AT10×980	980	98
AT10×730	730	73	AT10×960	960	96
AT10×700	700	70	AT10×3470	3470	347
AT10×660	660	66	AT10×3150	3150	315
AT10×610	610	61	AT10×2000	200	200
AT10×560	560	56	AT10×1940	1940	1494
AT10×500	500	50	AT10×1800	1800	180
AT10×1280	1280	128	AT10×1600	1600	160
AT10×1250	1250	125	AT10×1500	1500	150
AT10×1210	1210	121	AT10×1420	1420	142
AT10×1200	1200	120	AT10×1400	1400	140
AT10×1150	1150	115	AT10×1350	1350	135